Painting

We wash and paint many kinds of surfaces and objects, ranging from tankers to facades and industrial buildings. We always leave a set price and guarantee the work performed. We go through your requirements and co-work with the leading paint companies.

Station Painting

In our state of the art facility, we carry out work in a controlled environment. Anything that can be transported, we can surface in our station, such as cranes, tanks, boats, containers and trailers. We lift and handle boats up to 35 tons. Total area for blasting and painting of the station is 36 x 18 meters. All equipment is ex-rated. Our painting station is extra well lit and ventilated by a fan system of 20 000 m³ / hour. If you want to shorten drying times even further, we have access to extra heaters with capacity of 110 kW.

We wash and paint many metal roofs.

Painting requires a clean surface with some roughness for the paint to stick. Painting of rust color can be applied in several ways.

Brush painting is often used for so-called back-edges. Welds, railings, pipes and everywhere where it is difficult to get to it width the syringe.

Roller painting is also used to reach difficult places. In principle, where it is quicker than with a brush.

Spray painting is used on large areas, partly because it is quick, partly to build up a thick layer of color.

Airless spray is the method we use most. It means that the paint decomposes after the high pressure had passed through a nozzle and continues to the object to be applied. The pressure in the front of the syringe can be up to 400 bar. The advantages of this is that you get a good capacity, good penetration, thick coats and less paint mist.